The Definitive Source for IROC – Z
Tools Needed: Basic hand tools Die Grinder Hammer Files – round & flat Channel Lock pliers Parts Used: Griffin Pro Series aluminum radiator. Dual 1″ cores. 31×19″ universal fit. Part Continue Reading
This article will give you step-by-step instructions for installing a Grant steering wheel into your IROC. This procedure may vary slightly depending on the brand of steering wheel you choose. Continue Reading
I figured I’d go ahead an post this little guide for those who still do not understand what’s involved in setting the kick-down cable for the automatic transmissions (700R4). The Continue Reading
What you will need for the following procedure is carburetor cleaner and a wrench big enough to remove the IAC valve. Ensure your ignition if OFF. Remove the connector to Continue Reading
Before continuing, we recommend you clean your IAC valve. What you will need is a paperclip, torx screwdriver (T-25) to make adjustments and an accurate RPM gauge. If you can Continue Reading
Before continuing, you should have cleaned your IAC valve and adjusted your minimum air (or idle speed). Otherwise your throttle response may suffer and have poor idle. This is to Continue Reading
Many thanks go to Jim Irace and Willie (Thirdgen.org History Moderator) for their help and contribution to this article. We’ve been wanting to do this for some time now, just Continue Reading
So you’ve decided that you want an IROC, but now you don’t know what to look for, or how to determine sort of life this car has had to this Continue Reading