My car

[Calichevylover]

-Still no paint lol
-Bf goodrich g-force sport 255/50/zr16s on the back since i had a blowout. Will do 245 in the same style on the front when those need replacing
-Spohn Chrome Moly tubular rear lower control arms (installed)
-Spohn Chrome Moly tubular panhard bar (installed)
-Spohn subframe connectors (Awaiting install)
-Spohn Torque Arm, gonna order soon
-Roughly 90% complete with exterior led conversion. Got everything minus the reverse lights and 3rd brake light. Sequentials look AWESOME with the leds, very crisp and bright. (not autozone leds either)
-Complete with interior led conversion
-Haven't touched my hid projector retrofit in awhile

[tpirocz]

pics or this is a tall tale

[Calichevylover]

pics taken by my friend (who got me the bulbs) who has some snazzy camera setup




didnt take pics of the parts on the car, didn't feel like it, but panhard bar and control arms:

found not the master build sheet like i had thought, but the "accessory/trim" sheet in like new condition:

Tires:


tried to take a vid of the sequentials with the leds but the stupid camera makes the light look completely orange...which sucks because they are red led bulbs, no white at all

[Calichevylover]

hopefully i can take my car to a shop tomorrow to get the sfc's in

[Jim85IROC]

I've got those BFGs on my IROC, on my GTA, on my Corvette and on my Grand Prix. I like 'em.

[Calichevylover]

yes sir they are very nice. major upgrade from the generals

[Calichevylover]

car handles nice with the sfc's. not a "night and day" difference but noticeably tighter and alot less squeaking from dash and ttop areas, especially over rough roads.

[Formulated]

wow, my formy was a totally diff beast after the SFC's went on. Plus it was nice jacking up the car on the SFC and being able to put both jackstands under it.

[86blackiroc]

SFC's are worth it just for the jacking points. It's so nice just being able to roll the jack under the car anywhere along the rocker, then raise it up.

[Calichevylover]

think i need some new front springs.

[Calichevylover]

-got some front springs from a dude off of craigslist...he also gave me these aluminum strut mounts that he had on his car for about a month he said...got the springs and strut mounts for 120...have to get a pic..yal think aluminum strut mounts are good? he couldnt remember what the brand was and no part number was on it.
-Got the same bf goodrich tires for the front in 245.
-Might order a STB from UMI.
-converting reverse lenses to taillights so i will have 3 sequential bulbs and im trying to mount some "custom" reverse lenses in the black end panels.

[Jim85IROC]

wow, my formy was a totally diff beast after the SFC's went on. Plus it was nice jacking up the car on the SFC and being able to put both jackstands under it.

It probably depends on how solid the car was in the first place. My IROC feels like it's pretty well put together... no shimmies, squeaks, rattles, or other funny business. My GTA feels like a Sunbird convertable over bumps. Moral of the story: SFCs would probably make a far more noticable improvement on my GTA than on my IROC.

[Calichevylover]

so here is what i got...has a "spherical" bearing in it. what do yal think....install or don't install...

only word i see on there is china! :freakout:

[nitemare3o5]

you got ripped off on those front springs.

i got my whole set of lowering springs for my car for 105$ brand new.

[Calichevylover]

I paid 50 for springs

[chevymec]

Man those LED's look great. How was the install, just a bulb swap?

[Calichevylover]

yup just a bulb swap...well they have to go into the socket one way..i.e. if you put it in and it doesn't light up, take it out and flip it around so the contacts on the bulb match the ones on the socket. only part that sucked was when i put the cluster back in, and had to pull it back out to swap the bulbs i had put in wrong

[chevymec]

What brand bulbs are they?

[Calichevylover]

idk my friend is a vendor..dont know where he gets em from. alot of ppl use superbrightleds.com though

[Calichevylover]

gonna pull a couple plugs tomorrow to see if I am running too rich...

[Calichevylover]

No...gonna wait until i have some help with this.

[Calichevylover]

UMI Performance STB.

[Calichevylover]

new sequentials:

http://www.youtube.com/watch?v=8lW-4vIS7XA

also o2 sensor replaced today

[nitemare3o5]

!!

[K_IROCZ]

I also like the LED dash. Do you have any idea what the part numbers are, or if I can order them from your friend??